cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1379
Views
0
Helpful
1
Replies

Easy PIX Jumper Question

robert.hyde
Level 1
Level 1

This should be an easy one... Have a PIX 515 running 6.0, set up for AAA before the admin left (with the credentials) and now we are not able to get into the box. The generic password recovery process for the PIX does not work because it was authenticating to AAA, and the AAA servers are also gone. We have attacked that from multiple directions and we are ready to wipe it clean - it is being moved to a new project anyway. I understand that there is a jumper setting on the PIX itself that can be used to wipe the PIX clean, does anyone have this info on the jumpers? Thanks so much!

1 Reply 1

mkaneko
Cisco Employee
Cisco Employee

Actually pulling the jumper won't erase the flash.

you need certain software to do this which we do not distribute to the public.

You should be able to password recovery using np disk by tftp. I suggest to call TAC to get the file.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: