Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Easy VPN on Cisco 857

I'm trying to connect two small offices via Cisco 857 routers. The main office's router is configured as EasyVPN Server and the other one, without static IP, as EasyVPN remote. The tunnel is already stablished and I can ping any machine in the main office from any machine in the remote one, but that's as far as I can get.

No other service works across the tunnel. I can't connect to the apache web server via http. I can't access the files in the file server either. As said before, ping is the only thing working. Any ideas?

6 REPLIES

Re: Easy VPN on Cisco 857

Hello Hernan,

Most probably it is an ACL issue. Running config of both sites would help us to determine the issue.

Regards

New Member

Re: Easy VPN on Cisco 857

Thank you for your response.

I attach here both running configs.

Thank you very much again.

Regards,

Hernán.

Re: Easy VPN on Cisco 857

on the client

no access-list 1

no ip nat inside source list 1 interface Dialer0 overload

ip access-list ext NAT

deny 10.10.10.0 0.0.0.255 192.168.0.0 0.0.255.255

deny ip host 10.10.10.1 any

permit 10.10.10.0 0.0.0.255 any

ip nat inside source list NAT interface Dialer0 overload

New Member

Re: Easy VPN on Cisco 857

Thanks for the help.

It didn`t solve the problem though...

I attach here the new client configuration. Server has not benn touched.

New Member

Re: Easy VPN on Cisco 857

Hi,

do you finally solve your problem ?

New Member

Re: Easy VPN on Cisco 857

Hi,

Well, actually I didn't. The hints given here didn't work and I have been quite busy with other matters lately.

Maybe after christmas I'll have some more time...

127
Views
0
Helpful
6
Replies