Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Easy VPN Server

Hi,

I configured Easy VPN Server on Cisco 1841 & I am able to got an IP address form VPN Pool but unfortunately not able to access private address or servers on local LAN maybe because NATing.

Please Advice?

I attached the Router Configuration File.

Regards,

Mohanad R.Aljabi

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Easy VPN Server

Hi,

You have to bypass NAT for VPN Pool for IP Addresses. Please follow the below URL that explains on how to bypass NAT (Static) with route-map. Configuring this should get your VPN Working.

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094634.shtml

Regards,

Arul

** Please rate helpful posts **

1 REPLY
Cisco Employee

Re: Easy VPN Server

Hi,

You have to bypass NAT for VPN Pool for IP Addresses. Please follow the below URL that explains on how to bypass NAT (Static) with route-map. Configuring this should get your VPN Working.

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094634.shtml

Regards,

Arul

** Please rate helpful posts **

262
Views
0
Helpful
1
Replies
CreatePlease to create content