Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Enable Telnet to PIX 7.0(2) form outside interface

Hi,

how to enable telnet to pix outside interface.

I try to connect with telnet to a router in outside lan and then i would connect with telnet form router to pix.

Router have ip address 10.10.10.1 and Pix device have ip address 10.10.10.2.

I have tried to write this command:

telnet 10.10.10.1 255.255.255.255 outside

but doesn't work.

Why?

Thanks

3 REPLIES

Re: Enable Telnet to PIX 7.0(2) form outside interface

Re: Enable Telnet to PIX 7.0(2) form outside interface

Telnet is not allowed directly on the outside interface. You need to setup VPN to connect with telnet ! See this example.

Allowing a Telnet Connection to the Outside Interface :

http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a0080172797.html#wp1064460

sincerely

Patrick

Bronze

Re: Enable Telnet to PIX 7.0(2) form outside interface

I would forget Telnet, and use SSH (Teraterm has a good client). Use the document in Patrick's link for information on this.

158
Views
13
Helpful
3
Replies
CreatePlease login to create content