I have a Cisco 7200 VXR central router with an SA-VAM for 30 remote sites to VPN back. Occasionally I am getting this error on the console when one of the VPN tunnel falls over. Any ideas what this error is?
Jul 2 11:45:28.180: IPSECcard: an error coming back 0x0006
This is the show ver
AT00VR01#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IK9S-M), Version 12.2(13)T1, RELEASE SOFTWARE (fc
1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 03-Jan-03 15:04 by ccai
Image text-base: 0x60008940, data-base: 0x61BBA000
ROM: System Bootstrap, Version 12.2(4r)B2, RELEASE SOFTWARE (fc2)
BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.1(8a)E, EARLY DEPLOYMENT RELE
ASE SOFTWARE (fc1)
AT00VR01 uptime is 7 weeks, 4 days, 3 hours, 4 minutes
System returned to ROM by reload at 02:07:56 UTC Fri May 9 2003
System restarted at 08:57:56 UTC Sat May 10 2003
System image file is "disk0:/c7200-ik9s-mz.122-13.T1.bin"
cisco 7206VXR (NPE400) processor (revision A) with 245760K/16384K bytes of memor
y.
Processor board ID 29496364
R7000 CPU at 350Mhz, Implementation 39, Rev 3.3, 256KB L2, 4096KB L3 Cache
6 slot VXR midplane, Version 2.7
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
1 Integrated service adapter(s)
125K bytes of non-volatile configuration memory.
46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
8192K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
