Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
Community Member

Error on router

I have a Cisco 7200 VXR central router with an SA-VAM for 30 remote sites to VPN back. Occasionally I am getting this error on the console when one of the VPN tunnel falls over. Any ideas what this error is?

Jul 2 11:45:28.180: IPSECcard: an error coming back 0x0006

This is the show ver

AT00VR01#sh ver

Cisco Internetwork Operating System Software

IOS (tm) 7200 Software (C7200-IK9S-M), Version 12.2(13)T1, RELEASE SOFTWARE (fc


TAC Support:

Copyright (c) 1986-2003 by cisco Systems, Inc.

Compiled Fri 03-Jan-03 15:04 by ccai

Image text-base: 0x60008940, data-base: 0x61BBA000

ROM: System Bootstrap, Version 12.2(4r)B2, RELEASE SOFTWARE (fc2)

BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.1(8a)E, EARLY DEPLOYMENT RELE


AT00VR01 uptime is 7 weeks, 4 days, 3 hours, 4 minutes

System returned to ROM by reload at 02:07:56 UTC Fri May 9 2003

System restarted at 08:57:56 UTC Sat May 10 2003

System image file is "disk0:/c7200-ik9s-mz.122-13.T1.bin"

cisco 7206VXR (NPE400) processor (revision A) with 245760K/16384K bytes of memor


Processor board ID 29496364

R7000 CPU at 350Mhz, Implementation 39, Rev 3.3, 256KB L2, 4096KB L3 Cache

6 slot VXR midplane, Version 2.7

Last reset from power-on

Bridging software.

X.25 software, Version 3.0.0.

2 FastEthernet/IEEE 802.3 interface(s)

1 Integrated service adapter(s)

125K bytes of non-volatile configuration memory.

46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).

8192K bytes of Flash internal SIMM (Sector size 256K).

Configuration register is 0x2102

Cisco Employee

Re: Error on router

I believe you are hitting a bug ID CSCdy51248. Here's the excerpt of this' bug:

With a large number of tunnels, following error message starts popping up on the console window:

IPSECcard: an error coming back 0006

There is a code that has fix for it, but it is interim.

You may want to open up a TAC case to get the proper IOS reccommendation.



Community Member

Re: Error on router

Hi Yatin

I can't find this bug in CCO. Could you confirm the ID.


Cisco Employee

Re: Error on router

Hi Vinh,

Unfortunately, this is an "internal only" bug and hence it is not visible.

Sorry about that. Anything in specific that you wanted to look at?



Community Member

Re: Error on router

Thanks for your help, I will upgrade to 12.2.13T4 and see what happen.


CreatePlease to create content