OK....stupid question....My customer is using various 83x routers as EzVPN Clients connected to a Cisco Concentrator. They want to be able to access the PC's on the far end of the EzVPN tunnel (remote site) for management purposes. Short of tearing everthing down and reconfiguring for LAN to LAN tunnels, how can this be accomplished? They prefer not to go L2L to keep the router and concentrator configuration as simple as possible.
Information on configuring and monitoring the Cisco Easy VPN Remote feature to create IPsec Virtual Private Network (VPN) tunnels between a supported router and an Easy VPN server (Cisco IOS router, VPN 3000 concentrator, or Cisco PIX Firewall) that supports this form of IPsec encryption and decryption.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...