I have an 1800 router that we're using as an EZVPN client. It has one main ethernet port with 8 additional ethernet ports. However in testing only the main ethernet port is usable for a client (or switch). Attempting to set 'crypto ipsec client ezvpn ourvpn inside' on the 8 other ports results in logic errors and the tunnel not being established.
I'm sure I am missing something crucial here and those 8 ports shouldn't go to waste.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...