Does anybody know who to obtain DNS Server, Wins Server and Domainname entries for the Cisco VPN Dialer (Softwareclient) via dynamic DNS/DHCP (MODE_CFG_REPLY) during IPSec/VPN setup. Cisco dialer connect to a EzVPN server based on a router IOS. DNS/WINS/Domain information are not provided to the Cisco dialer, although this information is given by the dhcp network server.
DEBUG from Cisco VPN Client:
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS: , value = 10.236.195.130
I think in your case the router should provide the DNS/WINS information to theVPN client. You will have to configure the router for giving the DNS/WINS information to the client. Following links may help you
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...