Hi, I must set up this pix to replace another that is broken down. It worked like a failover,
and I would like to know if this pix has the right license to do it.
Many thanks inadvance
pix# sh ver
Cisco PIX Firewall Version 6.2(2)
Cisco PIX Device Manager Version 2.1(1)
Compiled on Fri 07-Jun-02 17:49 by morlee
pix up 40 secs
Hardware: PIX-515E, 64 MB RAM, CPU Pentium II 433 MHz
Flash E28F128J3 @ 0x300, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
Encryption hardware device : IRE2141 with 2048KB, HW:1.0, CGXROM:1.9, FW:6.5
0: ethernet0: address is 000b.fd81.e8ef, irq 10
1: ethernet1: address is 000b.fd81.e8f0, irq 11
2: ethernet2: address is 00e0.b606.81cf, irq 11
3: ethernet3: address is 00e0.b606.81ce, irq 10
4: ethernet4: address is 00e0.b606.81cd, irq 9
5: ethernet5: address is 00e0.b606.81cc, irq 5
Licensed Features:
Failover: Enabled
VPN-DES: Enabled
VPN-3DES: Disabled
Maximum Interfaces: 6
Cut-through Proxy: Enabled
Guards: Enabled
URL-filtering: Enabled
Inside Hosts: Unlimited
Throughput: Unlimited
IKE peers: Unlimited
Serial Number: 807044799 (0x301a86bf)
Running Activation Key: 0x532907f3 0xd26ba632 0xf3a8ade0 0xa70b67da
Configuration last modified by enable_15 at 07:22:13.690 UTC Fri Mar 26 2004