Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
New Member

failover license

Hi, I must set up this pix to replace another that is broken down. It worked like a failover,

and I would like to know if this pix has the right license to do it.

Many thanks inadvance

pix# sh ver

Cisco PIX Firewall Version 6.2(2)

Cisco PIX Device Manager Version 2.1(1)

Compiled on Fri 07-Jun-02 17:49 by morlee

pix up 40 secs

Hardware: PIX-515E, 64 MB RAM, CPU Pentium II 433 MHz

Flash E28F128J3 @ 0x300, 16MB

BIOS Flash AM29F400B @ 0xfffd8000, 32KB

Encryption hardware device : IRE2141 with 2048KB, HW:1.0, CGXROM:1.9, FW:6.5

0: ethernet0: address is 000b.fd81.e8ef, irq 10

1: ethernet1: address is 000b.fd81.e8f0, irq 11

2: ethernet2: address is 00e0.b606.81cf, irq 11

3: ethernet3: address is 00e0.b606.81ce, irq 10

4: ethernet4: address is 00e0.b606.81cd, irq 9

5: ethernet5: address is 00e0.b606.81cc, irq 5

Licensed Features:

Failover: Enabled

VPN-DES: Enabled

VPN-3DES: Disabled

Maximum Interfaces: 6

Cut-through Proxy: Enabled

Guards: Enabled

URL-filtering: Enabled

Inside Hosts: Unlimited

Throughput: Unlimited

IKE peers: Unlimited

Serial Number: 807044799 (0x301a86bf)

Running Activation Key: 0x532907f3 0xd26ba632 0xf3a8ade0 0xa70b67da

Configuration last modified by enable_15 at 07:22:13.690 UTC Fri Mar 26 2004


Re: failover license

The output of the show version says "Failover: Enabled". That tells you that with the current activation key failover is enabled. What you need to ensure next is that the harware and software versions match exactly with that of the primary unit.

CreatePlease to create content