Failure to Authenticate via Win2K Domain after Vers. 3.6.1 upgrade on 3080

[dmallyon]

Clients unable to Authenticate using Win2K Domain after 3080 upgraded to 3.6.1

Message in log:

216 09/02/2002 20:42:07.530 SEV=4 IKEDBG/ 65 RPT=3 144.137.98.128

Group [networks] User [CENTRAL\dmallyon]

IKE TM V6 FSM error history (struct &0x9a0b354)

<state>, <event>:

TM_DONE, EV_ERROR

TM_BLD_REPLY, EV_IP_OK

TM_BLD_REPLY,NullEvent

TM_BLD_REPLY, EV_GET_IP

221 09/02/2002 20:42:07.530 SEV=4 IKEDBG/ 65 RPT=4 144.137.98.128

Group [networks] User [CENTRAL\dmallyon]

IKE AM Responder FSM error history (struct &0x9a0b354)

<state>, <event>:

AM_DONE, EV_ERROR

AM_TM_INIT_MODECFG_V6H, EV_TM_FAIL

AM_TM_INIT_MODECFG_V6H, NullEvent

AM_TM_INIT_MODECFG, EV_WAIT

[smalkeric]

It sounds like maybe you've run into a new bug. If you go back to the previous version does it log you into the domain again? In either case, call Cisco support.

[dmallyon]

Yep, fallback to 3.5.2 works perfectly. No config change. I logged a case same time as posting first message; still not resolved. Same result for software client 3.6.1 or 3.5.x as well.

[zabbas]

We are using 3.6.1 code with a 3030 (same Win2K domain auth)...it is working fine.