Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Fatpipe Superstream. Bandwidth aggregation.

I have several custmomers that are considering Fatpipe's Superstream and would like to sell Cisco product instead. Has anyone duplicated the functionality in Cisco gear? Basically,its aggregating bandwidth from two small Internet pipes. I.E. DSL, Cable etc.. Should I push BGP?

Thoughts?

Steve

1 REPLY
New Member

Re: Fatpipe Superstream. Bandwidth aggregation.

I have one ISP who provides me with multiple links, to allow me to loadshare I use BGP with metrics, this allows BGP to pick the best routes out and our architects to decide inbound balencing across our IP range. here is an example config. hope it helps.

router bgp XXXXX

no synchronization

network x.x.x.x mask 255.255.240.0

redistribute connected route-map to_BT

redistribute static route-map BGP_OUT

neighbor x.x.x.x remote-as 2856

neighbor x.x.x.x route-map BGP_MET_250 out

neighbor x.x.x.x remote-as 2856

neighbor x.x.x.x route-map BGP_MET_251 out

neighbor x.x.x.x remote-as 2856

neighbor x.x.x.x route-map BGP_MET_252 out

maximum-paths 3

route-map BGP_MET_252 permit 10

match ip address 50

set metric 10

!

route-map BGP_MET_252 permit 11

match ip address 60

set metric 10

!

route-map BGP_MET_252 permit 12

match ip address 70

set metric 10

!

route-map BGP_MET_252 permit 13

match ip address 80

set metric 10

!

route-map BGP_MET_252 permit 14

match ip address 81

!

route-map BGP_MET_250 permit 10

match ip address 40

set metric 10

!

route-map BGP_MET_250 permit 11

match ip address 60

set metric 10

!

route-map BGP_MET_250 permit 12

match ip address 70

set metric 10

!

route-map BGP_MET_250 permit 13

match ip address 80

set metric 10

!

route-map BGP_MET_250 permit 14

match ip address 81

!

route-map BGP_MET_251 permit 10

match ip address 40

set metric 10

!

route-map BGP_MET_251 permit 11

match ip address 50

set metric 10

!

route-map BGP_MET_251 permit 13

match ip address 51

access-list 10 permit x.x.x.x 0.0.15.255

access-list 20 permit x.x.x.x 0.0.2.255

access-list 20 permit x.x.x.x 0.0.15.255

access-list 40 permit x.x.x.x 0.0.7.255

access-list 41 permit any

access-list 50 permit x.x.x.x 0.0.0.255

access-list 51 permit any

access-list 60 permit x.x.x.x 0.0.0.255

access-list 70 permit x.x.x.x 0.0.0.255

access-list 80 permit x.x.x.x 0.0.3.255

access-list 81 permit any

211
Views
0
Helpful
1
Replies
СоздатьДля создания публикации, пожалуйста в систему