Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

firewall priv lenel

what's the default priv level on firewall and how can it be changed..

3 REPLIES
Cisco Employee

Re: firewall priv lenel

Hello aksher@cisco,

Default priv is level 1. Enable gets you to priv level 15. You could also create a password at a predefined level too.

pixfirewall> sh curpriv

Username : enable_1

Current privilege level : 1

Current Mode/s : P_UNPR

pixfirewall# sh curpriv

Username : enable_15

Current privilege level : 15

Current Mode/s : P_PRIV

pixfirewall(config)# enable password cisco level 5

pixfirewall> enable 5

Password: ***** (I entered cisco)

pixfirewall# sh curpriv

Username : enable_5

Current privilege level : 5

Current Mode/s : P_PRIV

Hope this helps! If so, please rate.

Thanks

New Member

Re: firewall priv lenel

for what version is the above one pixfirewall(config)# enable password cisco level 5

i think for pre 7.0 version it's password (password) secret

Cisco Employee

Re: firewall priv lenel

My previous post was on 7.x. I did the exact same thing on 6.3 and it works in the same manner.

pixfirewall> sh curpriv

Username : enable_1

Current privilege level : 1

Current Mode/s : P_UNPR

pixfirewall> en

Password:

pixfirewall# sh curpriv

Username : enable_15

Current privilege level : 15

Current Mode/s : P_PRIV

enable password cisco level 5

pixfirewall> en 5

Password: ***** (I entered cisco)

pixfirewall# sh curpriv

Username : enable_5

Current privilege level : 5

Current Mode/s : P_PRIV

Hope that helps! If so, please rate.

Thanks

190
Views
0
Helpful
3
Replies