Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Firewall Services Blade uprade

I want to upgrade the software on our firewall blade from 1.1(2) to 2.3, however, the only documentation I can find that mentions how to do it gives the following example instructions:

copy tftp://209.165.200.226/cisco/c6svc-fwm-k9.2-1-1.bin flash:

surely there is more to upgrading the blade than this command?

1 REPLY

Re: Firewall Services Blade uprade

Check the Release Notes of the release that you are installing. But no you do not need more than that. To install the image there you just need the command that you mentioned and reload that blade after that.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/fwsm/fwsm_2_3/fwsm_rn/fwsmrns.htm

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/fwsm/fwsm_2_3/

sincerely

Patrick

162
Views
0
Helpful
1
Replies