Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

fixup protocol

How can i open port 450 on the pix 525 firewall running 6.1 (3) code

tserver 450/tcp

Computer Supported Telecomunication Applications

regards

anair

4 REPLIES
New Member

Re: fixup protocol

What do you mean "open" a port? Are you wanting to allow access to the port from the outside or inside?

If from the outside, create a static for the server they will be accessing and then add the desired port to your in bound ACL.

Silver

Re: fixup protocol

Fixups are application layer intelligence about specific protocols.

What you need is a access-list entry in your ACL for the outside, outside-acl in my example. Assuming there is a server at private address X on the inside, and you want to access it from the outside using address Y. You would need something like this:

static (inside,outside) Y X netmask 255.255.255.255

access-list outside-acl permit tcp any host Y eq 450

You'll need to clear the translation for that host if you're adding the static statement as part of this new configuration.

clear xlate local X (X is the server address)

-S

New Member

Re: fixup protocol

Thanks..

It worked

regards

New Member

Re: fixup protocol

znair,

When someone provides a working solution for you, you should reward him by giving him the points for correcting your problem......

82
Views
0
Helpful
4
Replies