I have two FWSM cards in two 6513 switches with failover activated.
Connected to the switches are several servers connected to the different interfaces of the firewall. One of them is one HPOV ( openview ) which needs the ARP table of the FWSM to reach and explore the whole net to begin to monitorize the network.
My problem is I cannot get the ARP table from the firewall, so, I cannot discover more devices, i'm able to SNMP them by editing the SNMP poller in the OVO configuration file, but even the network devices appears, it cannot reach by discover job.
I paste my sh ver here .
FWSM -1# sh ver
FWSM Firewall Version 3.2(1)
Device Manager Version 5.2(1)F
Compiled on Thu 07-Jun-07 20:16 by dalecki
FWSM-1 up 7 days 13 hours
failover cluster up 1 year 94 days
Hardware: WS-SVC-FWM-1, 1024 MB RAM, CPU Pentium III 1000 MHz
Flash STI Flash 7.2.0 @ 0xc321, 20MB
0: Int: Not licensed : irq 5
1: Int: Not licensed : irq 7
2: Int: Not licensed : irq 11
The Running Activation Key is not set, using default settings:
Configuration last modified by enable_1 at 13:59:35.590 CET Mon Nov 3 2008
I think 3.2 version cannot retrieve the MIB for ARP, and I have finded that version 4.01 does. But I was unable to find any kind of upgrading notes here, and we have the monitoring of server farms proyect sttoped for this problem.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...