Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FWSM and VLANS withing MSFC

Hi

I have FWSM configured in a 6500 chassis. The MSFC is logically installed before the FWSM which means the firewall is the one connected to the internet. I have only one VLAN shared between the MSFC and the FWSM. The problem is that the FWSM can reach anywhere except the VLANs configured on the MSFC (other than the shared VLAN). I have static routes on my FWSM pointing to the MSFC to reach other VLANs on the MSFC. NAT is also there. Can anyone give me any clue? Is this related to SVI? Do I need SVI on my configurations?

Regards

2 REPLIES
New Member

Re: FWSM and VLANS withing MSFC

?

Anonymous
N/A

Re: FWSM and VLANS withing MSFC

Hello,

What Type of MSFC are you using? Also if you are using ping from the FWSM you may want to check out the ICMP command. If you show me your config on the FWSM and MSFC maybe I can see something for you.

95
Views
0
Helpful
2
Replies
CreatePlease login to create content