we have 6513 and FWSM 3.2 module with 5 virtual context. Which is the easiest way to add this in CSManager 3.2. I found on this forum that is the best way is to add every context manually trough specific IP address of every context. But, while adding Admin context, should I check Security Context box? As I presume, we should "see" every context as different and independent firewall?
Use the Add Security Context dialog box and the Edit Security Context dialog box to define and maintain contexts for the currently selected FWSM. Note that at least one security context must be designated as the admin context.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...