Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FWSM IOS & ASDM IOS Upgrade

I successfully updated the IOS on FWSM from 2.3 to 3.2(1). At the same time, I loaded the new ASDM IOS asdm-521f.bin.

After reloading the FWSM's, I am receiving the following:

FWSM Firewall Version 3.2(1)

Detected an old ASDM version.

You will need to upgrade it before using ASDM.

I thought that once the new asdm-521f.bin was copied to flash:asdm that the reload would automagically read the new ASDM.

What am I missing?

2 REPLIES
Silver

Re: FWSM IOS & ASDM IOS Upgrade

For the latest 3.1 image on the FWSM, the required ASDM image is 5.0F. However this is not bundled in the 3.1 code. It will be available seperately to download on the FWSM

New Member

Re: FWSM IOS & ASDM IOS Upgrade

With the upgrade to 3.2(1) you need to upload the new ASDM AFTER the reload into the new FWSM image (not before).

If you reload the new ASDM it will work just fine (you don't need to reload the FWSM).

366
Views
0
Helpful
2
Replies
CreatePlease to create content