Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Getting mY PIX Current

I have a PIX 515 that was never put into production. I want to get it curent before I start using it in the Lab. What do I need to get/do to it.

Here is its Info:

Cisco Secure PIX Firewall Version 5.3(1)

Compiled on Tue 05-Dec-00 17:51 by morlee

Hardware: PIX-515, 32 MB RAM, CPU Pentium 200 MHz

Flash i28F640J5 @ 0x300, 16MB

BIOS Flash AT29C257 @ 0xfffd8000, 32KB

0: ethernet0:

1: ethernet1:

Licensed Features:

Failover: Disabled

VPN-DES: Disabled

VPN-3DES: Disabled

Maximum Interfaces: 3

Cut-through Proxy: Enabled

Guards: Enabled

Websense: Enabled

Throughput: Unlimited

ISAKMP peers: Unlimited

Thanks!

Scott<-

2 REPLIES
New Member

Re: Getting mY PIX Current

Check the following link. It has detailed instuctions on how to do the upgrade.

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_60/config/config.htm

Cisco Employee

Re: Getting mY PIX Current

Hi Scott,

PIX version 6.2(1) is the most current release of PIX software. It has many additional features over previous versions. You can follow the upgrade procedure here to upgrade your PIX:

http://www.cisco.com/warp/public/110/upgrade.shtml

Also, you may consider installing PDM version 2.0 to manage the PIX through a web based GUI if you wish.

Hope that helps,

David.

71
Views
0
Helpful
2
Replies
CreatePlease to create content