Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Getting Started.... PIX, VPN, IPSec

I have a PIX setup to allow the locally connected network to get out through the PIX, for some reason my other internel routed subnets cant get out. )-;

Any books, sites, tips, etc to help me get up to speed on the PIX?

Thanks,

Scott<-

2 REPLIES
Cisco Employee

Re: Getting Started.... PIX, VPN, IPSec

for your internal routed subnets to talk through PIX, check the following;

- have nat/global configured correctly

- if there is an ACL on inside interface, permit these networks

- static route on PIX for inside networks pointing to internal next-hop

Best place to start with following URLs

http://www.cisco.com/warp/customer/110/top_issues/pix/pix_index.shtml

http://www.cisco.com/warp/customer/707/index.shtml#pix

Also get this book, a good resource for starters;

Cisco® Secure PIX® Firewalls

ISBN: 1587050358

http://www.ciscopress.com/catalog/product.asp?product_id={DD5D9082-5332-44DA-9AC7-E7D9D91035C6}

HTH

R/Yusuf

New Member

Re: Getting Started.... PIX, VPN, IPSec

Thanks I'll Check out the links and the books!

Scott<-

84
Views
0
Helpful
2
Replies