Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Group name gets corrupted sometimes



6821 03/11/2004 00:15:32.890 SEV=4 IKE/0 RPT=337

Group [test] User [user]

Phase 1 group (test) is being overridden by user group (test1$R~¨)

6823 03/11/2004 00:15:32.890 SEV=4 IKE/52 RPT=1269

Group [testñ1$R~¨] User [user]

User (user) authenticated.

6824 03/11/2004 00:15:33.140 SEV=5 IKE/184 RPT=1264

Group [testñ1$R~¨] User [user]

Client OS: WinNT

Client Application Version: 4.0.2 (D)

6826 03/11/2004 00:15:33.140 SEV=5 IKE/132 RPT=75

Group [testñ1$R~¨] User [user]

Cannot obtain an IP address for remote peer

6828 03/11/2004 00:15:33.140 SEV=5 IKE/194 RPT=137

Group [testñ1$R~¨] User [user]

Sending IKE Delete With Reason message: No Reason Provided.


As you can see is the group overwitten by rubbish, and since this group isn't configured on the VPN concentrator the tunnel can't be established.

Any reason why this happnes, it occurs only sometimes.


Re: Group name gets corrupted sometimes

Which version of OS are you running on the concentrator. If you are running one of the latest versions such as 4.0.1D or E, bug CSCec43986 might explain what you are seeing.

New Member

Re: Group name gets corrupted sometimes

I'm indeed running OS 4.0.1E on the concentrator.

But, if I remember it well, it had somethinf to do with the base-group name being corrupted with characters.

In my case the specific user group gets corrupted.