11-20-2008 01:57 PM - edited 02-20-2020 09:41 PM
folks
i looking for an acl to adapt for my perimeter router inbound and outbound
i've had a look at one from the nsa site and have adapted it
has anyone a link to something that would help?
greatly appreciated
thanks to anyone taking the time to read this or reply
Solved! Go to Solution.
11-20-2008 05:33 PM
You may also try this one, edge filtering
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_white_paper09186a00801afc76.shtml
http://www.cisco.com/en/US/tech/tk648/tk361/tk821/tsd_technology_support_sub-protocol_home.html
11-20-2008 02:13 PM
Michael-
I maintain an ACL for our DIACAP certification. You can find it here (may have to cut-n-paste)-
Hope that helps
11-20-2008 05:33 PM
You may also try this one, edge filtering
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_white_paper09186a00801afc76.shtml
http://www.cisco.com/en/US/tech/tk648/tk361/tk821/tsd_technology_support_sub-protocol_home.html
11-21-2008 01:20 AM
jorge
many thanks for your input
greatly appreciated
11-21-2008 09:14 AM
Michael,
One other good resource for Security Related Topic is Cisco Validated Designs for Security Solutions. Check this out when you have some time.
http://www.cisco.com/en/US/netsol/ns744/networking_solutions_program_home.html
Regards,
Arul
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: