Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Hardware client 3002 user Authentication

I have a 3002 concentrator connecting to a 3030. Using Lan Extension Mode. The 3002 is using DHCP to assign addresses. I want the users connecting to the 3002 to be forced to authenticate with a domain server on the head-end (3030 side). I want no one to gain access thru this tunnel without authentication. There are multiple VPNs connected to this device. Is it a matter of setting up the authentification server and putting a check in the group box for users? and if so, how does it affect other VPN's who are authenticated locally? Is there a way for both to co-exsist..running 4.7.2 on 3030.

Thanks in advance for any help

2 REPLIES
Silver

Re: Hardware client 3002 user Authentication

I don't think this will affect the other VPNs connected to the 3030 device. Because, I believe this authentication is anyway going to be done on a per user basis.

The following documents may help you more.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a0080094297.shtml

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/prod_configuration_examples_list.html

New Member

Re: Hardware client 3002 user Authentication

That worked fine, thank you very much.

Is there a link where you can modify the web page the user see's after logging in?

99
Views
0
Helpful
2
Replies