I've been trying to find the answer and tried many different configs to no avail. Here is what I have and what I want to do. I have a 2514 and one static ip from my cable modem provider. I want to put the public ip on one eth interface and a private on the other eth interface and NAT between the two of them. I will also be running the DHCP server on the 2514 to provide internal ips to other machines. The kicker is I want to be able to route traffic (www, mail, etc) destined for the public ip ports to internal machines. Someone please help me!!
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...