Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

help with explanation of command "sh cry eng acc stat"

I am troubleshooting a problem with our VPN network and I used the command "show crypto engine accelerator statistic". Does anybody know the link on CCO where it explains the output of this command in detail. I am most interested in what the "Alerts:1" output means

--------------------------

194220rt001#sh cry eng acc stat

Encryption AIM in aim slot: 0

ds: 822EF798 idb: 822ECE68

Statistics for Encryption Module:

207329 packets in 207329 packets out

100681 packets decrypted 106648 packets encrypted

51580884 bytes decrypted 13109648 bytes encrypted

55205400 bytes before decrypt 16948976 bytes after encrypt

13 paks/sec in 13 paks/sec out

29 Kbits/sec decrypted 9 Kbits/sec encrypted

0 packet overruns

rx_no_endp: 0 rx_hi_discards: 0 fw_failure: 0

invalid_sa: 0 invalid_flow: 0 cgx_errors 0

fw_qs_filled: 0 fw_resource_lock:0 lotx_full_err: 0

null_ip_error: 0 pad_size_error: 0 out_bound_dh_acc: 0

esp_auth_fail: 0 ah_auth_failure: 0 crypto_pad_error: 0

ah_prot_absent: 0 ah_seq_failure: 0 ah_spi_failure: 0

esp_prot_absent:0 esp_seq_fail: 0 esp_spi_failure: 0

obound_sa_acc: 0 invalid_sa: 0 out_bound_sa_flow: 0

invalid_dh: 0 bad_keygroup: 0 out_of_memory: 0

no_sh_secret: 0 no_skeys: 0 invalid_cmd: 0

dsp_coproc_err: 0 comp_unsupported:0 pak_too_big: 0

null packets: 0

pak_mp_length_spec_fault: 0

tx_lo_queue_size_max 0 cmd_unimplemented: 0

14997 seconds since last clear of counters

Interrupts: 395982 Immed: 3 HiPri ints: 205873

LoPri ints: 190210 POST Errs: 0 Alerts: 1

Unk Cmds: 0 UnexpCmds: 0

cgx_cmd_pending:0 packet_loop_max: 0 packet_loop_limit: 0

----------------------------------------------------

Thanks

Michael

1 REPLY
Bronze

Re: help with explanation of command "sh cry eng acc stat"

I searched Cisco's site and came up with nothing detailed on that alert. It's probably a good idea to tell Cisco's tac about it though when you're troubleshooting this with them.

100
Views
0
Helpful
1
Replies
CreatePlease login to create content