how can i connect to ibm db2 behind pix525?

[wanghy73]

i have a application server outside pix525, and a db2 server inside.

but i can't connect them through pix525 steadily, sometime the connection will

be cut. the db2 wrong message is network problem. but i don't know the reason, if the pix525 does not agree with the a long time connection from the outside to the inside database.

[kbeltz]

If the connection is Idle for the specified time Pix will automatically drop it. You can configure the time using the timeout command specifying TCP or UDP sessions. For the command usage check the following URL

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/cmdref/tz.htm#1026093