how do i configure my pix 515 r to work with outlook express and exchange 2000
I have a Pix 515r with an inside and outside interface. I have an exchange 2000 server inside, i can do outlook web access, However i can not set up outlook express on a computer on the outside network to access the mail server. Ports 25 and 110 are open, do i need to open any other ports.
Re: how do i configure my pix 515 r to work with outlook express
Provided you are doing POP3 (110) and SMTP (25) you should not need to open up any other ports. I gather you have 80 and proberly 443 open already if you can use web mail. One easy test to make sure you PIX is not at fault is to telnet to the global ip address of your mail server from the outside on port 25 and see if you get a response and also on port 110 and see if you get a response. To do this telnet here is the syntax below.
If you get a response then there is an issue with your client.
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...