Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How do i configure PIX 501 for PC Cisco client vpn

Hi

I want to connect my PC on internet to a Pix 501. I have Ciscos Vpn clinet installed in the PC. Is this possible and how do I configure the pix??

3 REPLIES
Cisco Employee

Re: How do i configure PIX 501 for PC Cisco client vpn

Hello killroy,

You asked "Is this possible"

Yes

Here is a good link on how to configure this

How to Configure the Cisco VPN Client to PIX with AES

http://www.cisco.com/en/US/products/sw/secursw/ps2308/products_configuration_example09186a00801e71c0.shtml

Hope that helps! If so, please rate.

Thanks,

hemendoz

New Member

Re: How do i configure PIX 501 for PC Cisco client vpn

Thanks great help.

One more.

If I want to use a dhcp server from the inside to asign ip:s to the vpn Pc.

Any good commands ?

Gold

Re: How do i configure PIX 501 for PC Cisco client vpn

IPsec doesnt use DHCP for address assigment but you must create local pool on PIX from this pool will be VPN client addressed...

Check following command from mentioned link

ip local pool vpnpool1 10.10.8.1-10.10.8.254

In this case VPN clients are getting IPs from this pool

M.

411
Views
5
Helpful
3
Replies
CreatePlease login to create content