cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
6242
Views
0
Helpful
1
Replies

How do I get an ASA-5540 back to default config?

jkeeffe
Level 2
Level 2

Is there an easy way to re-apply the default config that comes with a new ASA-5540? I'd like to have our ASA-5540 be back to its default with 192.168.1.1 on the inside interface and act as a DHCP server so I have connect a PC to it to begin initial configuration using the ASDM.

The ASA-5540 is running on asa723-k8.bin.

1 Accepted Solution

Accepted Solutions

srue
Level 7
Level 7

configure factory-default

http://www.cisco.com/en/US/docs/security/asa/asa72/command/reference/c4_72.html#wp2039866

a simple "write erase/reload" would also do the trick.

View solution in original post

1 Reply 1

srue
Level 7
Level 7

configure factory-default

http://www.cisco.com/en/US/docs/security/asa/asa72/command/reference/c4_72.html#wp2039866

a simple "write erase/reload" would also do the trick.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: