How do I install CA certificate for SSL client for HTTPS with CWMP/TR.69
I am having problems getting TR.69/CWMP to work with SSL/HTTPS to authenticate the username and pull down the correct config. If i use HTTP all works well, but I need to secure the connection. The issue is not so much the CWMP/TR.69 as that works if using HTTP instead of HTTPS. I need help to install certificate onto router so that router can authenticate with the Configuration server using SSL.
I need to have the cisco router use the specified username and password to authenticate with the ACS server to pull down the config for the ADSL connection. The ACS Server is expecting the router to use SSL.
My question is this:
I have been given what I believe to be CA sbordinate certificate. How do I install the CA Sub certificate so that the router has the correct credentials to authenticate with the ACS server, in that the router sends the right credentials so that the Cisco router acts as the client in the 3 way handshake and not as the server????
I have installed cert as a Trustpoint but this does not seem to work:
PKI transaction and some CWMP message debugs below when cnfigured with a Trust point. I used this as a guide and followd steps 2 and 6, which was to create trustpoint, then authenticate the cert. Do I need any other steps or to do this in a completely different way?
DocumentationCode download linksGoalRequirementLimitationsSupported ISR and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and UCS-E Blades:Step by Step ConfigurationConfigure one of the connectivity options to access the Cisco IMC from the n...
Firepower Threat Defense (NGFWv) on UCS E-series - Transparent Mode in HA
DocumentationCode download linksGoalRequirementLimitationsSupported ISR and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and UCS-E Blades:Step by Step ConfigurationCo...
I am currently unable to specify "crypto keyring" command when configuring VPN connection on my cisco 2901 router.
The following licenses have been activated on my router :