Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How does PIX determine time zones?

We found that we needed to set our PIX time to our time+6 hours in order to get the PDM graphs to indicate correct time.

Assuming we in CST are UTC-6, California, PST, would be UTC-8. How does the pix determine which time zone it 'lives in' ?

2 REPLIES
Anonymous
N/A

Re: How does PIX determine time zones?

The pix has no concept of timezone. If using IPSec and certificates you should set the pix clock to GTM, use the clock set command. The problem with DPM graphs may be in PDM, not the pix. Check the time and zone on the PDM client, if this is OK open a case with the TAC.

New Member

Re: How does PIX determine time zones?

You can do NTP with ver 6.2.1 This is my CA example:

Scaggs

Cisco PIX Firewall Version 6.2(1)

Cisco PIX Device Manager Version 2.0(1)

clock timezone PST -8

clock summer-time PDT recurring

ntp authenticate

ntp server 192.5.41.40 source outside prefer

ntp server 92.216.191.1 source outside

279
Views
0
Helpful
2
Replies