Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to assign a fixed IP adress for a PIX VPN user ?

we are using Cisco VPN clients to connect into our PIX 515E using ACS3.1 and IPSec. How is it possible to assign fixed IP addresses for the users and control user login time?

1 REPLY
Cisco Employee

Re: How to assign a fixed IP adress for a PIX VPN user ?

At the moment you can't do either of these. The IP assignment is only done via a local pool of addresses on the PIX, anbd there's no way to tell it to assign a particular address toa particular user . Similarly with login times, there's no way to define specific idle times for specific users, it's a global parameter that gets assigned to all VPN connections.

You would get this functionality if you connected into a VPN3000 concentrator, but unfortunately the PIX doesn't (and never will) have all the features that the VPN3000 has.

108
Views
0
Helpful
1
Replies