Re: How to assign an ACL to a VPN Client using Cisco 3005 and Ra
Okay, i found the solution. It can be done with the Cisco-AVPair attribute oder the Filter-Id. If you use Filter-Id you have to define the ACL on the Concentrator. If you use Cisco-AVPair "ip:inacl#1=permit ...." you can assign the ACL from the Radius, which scales a bit more if you have several concentrators. Thanks anyway
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...