How to configure 2 different VPN Partners with the same private IP-Address

[steisskal]

Hello,

I have a PIX 501 running with 6.3.(1).

There is a site to site VPN with a Partner1:

local-lan is 192.168.47.0/24 vpn-partner1-lan is 192.168.1.0 /24 no nat between the vpn partners.

Now we need a second site-to-site VPN with another Partner. But the LAN of this Partner is also 192.168.1.0 /24, like VPN Partner1.

What can I to to get the second VPN to work?

Many Thanks Henry

[haris.cisco]

hi,

NAT the second VPN partner to a different subnet

[steisskal]

And how to configure this?

[mpalardy]

The new partner cannot use 192.168.1.0/24. The recommandation is to use a 192.168.x.0/24 network that will fit requirements from both ends.

Mike