Taking Example 8, how do I configure so that traffic from VLAN 4 going to VLAN 201 can be passed thru a 3rd party IPS. Please do not recommend Cisco IPS Module as that is not an option. Thanks for your help.
Re: How to configure FWSM to work with 3rd party IPS
Does the traffic HAVE to flow through the IPS? Or, can you just set up a SPAN port on the 6500 to send a copy of all the traffic to the IDS/IPS? I don't know of a way on the FWSM to redirect the traffic to an external device. You could possibly set up PBR once it hits the MSFC and set the next-hop to the IPS. Can you set the IPS to forward L3 traffic? If not, you can connect both interfaces to the MSFC in separate VLANS. Feel free to correct me if you think I am off base. HTH
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...