Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to:Display "Last configuration change"

How do I get my routers to display:

"Last configuration change" and

"configuration change since..."

and if possible can I trap on these?

1720 IOS=12.2

Thank you in advance,

Bart

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: How to:Display "Last configuration change"

To get those displays the router must be sure what date and time is. The best way to accomplish this is to run NTP and learn time from an NTP server. An alternative is to use the clock set command to set the time.

When the router has an authoritative time the display you want is automatic.

2 REPLIES
Hall of Fame Super Silver

Re: How to:Display "Last configuration change"

To get those displays the router must be sure what date and time is. The best way to accomplish this is to run NTP and learn time from an NTP server. An alternative is to use the clock set command to set the time.

When the router has an authoritative time the display you want is automatic.

New Member

Re: How to:Display "Last configuration change"

Thanks!

487
Views
0
Helpful
2
Replies