how to find out which bundle the PIX is

[durnie]

I just bought a PIX 520 and need to find out if it's the failover, restricted, or unrestricted bundle. Here is the show version from it:

pixfirewall# sh ver

Cisco Secure PIX Firewall Version 5.2(5)

Compiled on Mon 05-Feb-01 20:01 by morlee

pixfirewall up 7 secs

Hardware: SE440BX2, 128 MB RAM, CPU Pentium II 349 MHz

Flash i28F640J5 @ 0x300, 16MB

BIOS Flash AT29C257 @ 0xfffd8000, 32KB

0: ethernet0: address is 00d0.b790.191d, irq 11

1: ethernet1: address is 00d0.b790.1918, irq 10

2: ethernet2: address is 00e0.b601.2f02, irq 9

3: ethernet3: address is 00e0.b601.2f01, irq 11

4: ethernet4: address is 00e0.b601.2f00, irq 15

5: ethernet5: address is 00e0.b601.2eff, irq 10

Licensed connections: 65536

Serial Number: 18031982 (0x113256e)

Activation Key: 0x710871d6 0x8d6661bb 0x879eae46 0xe1932a78

[j-block]

It should look something like this:

pixfirewall# show version

Cisco Secure PIX Firewall

Version 6.1(1)

Licensed Features:

Failover: Enabled

VPN-DES: Disabled

VPN-3DES: Disabled

I’m guessing yours is not enabled. You can email licensing@cisco.com with your serial number and activation key and they’ll tell you for sure.