Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

How to: PIX 515 as remote access VPN

Anyone have any good advice or links for how to setup remote access VPN on a PIX 515E, and what the preferred client setup/app to use?

I've set it up...but it's not working. Anything I could use to check off my steps would be appreciated.

TIA...

-->jason

3 REPLIES
Cisco Employee

Re: How to: PIX 515 as remote access VPN

New Member

Re: How to: PIX 515 as remote access VPN

Thanks Glenn -->

From that link, I've set up everything correctly.

Here is what I'm getting in the Log Window -->

Cisco Systems VPN Client Version 4.0.3 (A)

Copyright (C) 1998-2003 Cisco Systems, Inc. All Rights Reserved.

Client Type(s): Windows, WinNT

Running on: 5.0.2195

1 20:32:18.934 11/04/03 Sev=Warning/3 IKE/0xE3000056

The received HASH payload cannot be verified

2 20:32:18.934 11/04/03 Sev=Warning/2 IKE/0xE300007D

Hash verification failed... may be configured with invalid group password.

3 20:32:18.934 11/04/03 Sev=Warning/2 IKE/0xE3000099

Failed to authenticate peer (Navigator:899)

4 20:32:18.934 11/04/03 Sev=Warning/2 IKE/0xE30000A5

Unexpected SW error occurred while processing Aggressive Mode negotiator:(Navigator:2199)

Any help is appreciated...

-->jason

New Member

Re: How to: PIX 515 as remote access VPN

Here is more information about this problem, that may help?

I'm have a PIX 501 at home, using DSL over PPPoE.

I added an access-list allowing isakmp to my home PC....but when I sniffed the traffic, it looks like the SA isn't working properly...any suggestions?

261
Views
0
Helpful
3
Replies
CreatePlease to create content