Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

HTTP and PDM problem on Pix 520 firewall

Hi

I have a pix 520 firewall(6.1(4) ver), pdm and http are enabled, i just can't access the pix through HTTP( http://ipaddress) neither the pdm (https://ipaddress),having the the knowledge that i have a pix 515 working fine with pdm and http), is there any workaround?

B Regards

Joseph

2 REPLIES
New Member

Re: HTTP and PDM problem on Pix 520 firewall

I've had a similiar problem. Open your browser, go to --> Tools --> Internet Options, --> Connections --> LAN Settings. There you must disable the option "use a proxy server". Confirm with ok then enter your Firewalls IP in the

address field (https://xxx.xxx.xxx.xxx)

The passwort is your enable password.

I hope this hint could solve your problem.

Dario

Silver

Re: HTTP and PDM problem on Pix 520 firewall

what does a "show http" do?

you need to see:

http server enabled

and netblocks that are allowed to connect to it, and the interfaces which they are on:

192.168.0.0 255.255.255.0 inside

144
Views
0
Helpful
2
Replies
CreatePlease login to create content