Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

https failure on management interface - ASA

I am trying to execute https://asamanagementip but the page cannot be displayed. I am able to ping the management ip from my PC. http server enable has also been applied and my local network is allowed in the http configuration.

I can do an https to the ASA inside but not management IP.

What could be the reason.

Thanks.

4 REPLIES
New Member

Re: https failure on management interface - ASA

Few more observations.

When I am on the network other tha management interface network, ping works but telnet to port 443 does not.

When I connect to the same network as management interface, telnet works and I can open the https page. However, once I click to accept the security certificate, it says page cannot be displayed.

The java version I am using is 1.5.0_17-b04. PC OS is Windows XP Prod SP3.

Also please advise whether can I use ASDM on management interface from a different network or is it restricted.

Thanks.

Re: https failure on management interface - ASA

Are you permining source network for http via management0/0 interface.

http management

New Member

Re: https failure on management interface - ASA

Yes, I am.

Re: https failure on management interface - ASA

ok, you said you can https via other interface fine from the PC but when you are with same pc in management0/0 subnet telnet to 443 works but not https page not found, if you are using same pc for test is not then the java issue, I do know you should be able to https via management interface.

what version of code are you using to look at bug database and rule out any bugs.

if I do recall management-only statement under 0/0 interface do only allow certain management ports udp/tcp snmp and some others,not regular traffic, http should be among those ports.

you could just for test and try, go to managgement0/0 interface and do no management-only and try https from browser, if it does not work I would tend to incline it could be a bug.

150
Views
0
Helpful
4
Replies
CreatePlease login to create content