Customer has Cisco837 (Site A) and a PIX 501 (Site B). working perfectly in a site-to-site VPN. A remote access VPN is configured on (B), but because of the PIX routing limitations, they of course can't access site (A).
I do not think you are going to get this to work since the PIX is not going to route the VPN packets back out the interface (Outside in this case) it originally received the packets on.
Depending on what your customer wants to do, why not setup a host on the network behind the PIX that they can Terminal Services into, or ssh into and then from that host, access the resources on the network behind the Cisco837? Good luck.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...