Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

HW VPN Pix501 to 3005 concentrator. No DNS possible?

Greetings all - I have pix501 v6.2 with a lan-lan connection to a 3005 concentrator v3.5. Is there a way to have the clients on the pix side get our internal DNS on the inside of the 3005 and still have DNS from the dhcp enabled pix501 for internet traffic? I would hate to have to screw with each p.c's host table.

2 REPLIES
Cisco Employee

Re: HW VPN Pix501 to 3005 concentrator. No DNS possible?

No way to do this with a LAN-to-LAN tunnel, since we don't touch the end clients IP stack at all.

You can do this with the VPN client connecting to the 3005 and using th esplit-DNS feature, but as I said, with a L2L we don't touch anything on the PC so there's no way to do it.

Sorry.

New Member

Re: HW VPN Pix501 to 3005 concentrator. No DNS possible?

O.K. Thank You..

125
Views
0
Helpful
2
Replies