I connected, but I cant see anything on the inside.. )-;

[stownsend]

I'm configuring a PIX in a test bed. Its Currently set yo with a Win2K Server Behind the PIX,

The Server behind the PIX and get out and Surf the Web.

From a client on the outside I can connect to the PIX via Win2K DUN PPTP and have it register the computer on the network. Its gets a DHCP address from the PIX.

Though the Remote Client cant See (ping) the server or the PIX on the inside.

Any Suggestions on where to look?

Thanks,

Scott<-

[plemieux72]

It sounds like it might be an access-list issue. Check your config and ensure you have something like this:

access-list 101 permit ip 192.168.1.0 255.255.255.0 10.1.1.0 255.255.255.0

ip local pool vpnpool 10.1.1.10-10.1.1.19

global (outside) 1 interface

nat (inside) 0 access-list 101

nat (inside) 1 0.0.0.0 0.0.0.0 0 0

Pierre

[jbalsdon]

If you figure this one out, please let me know. I am having the same problem