I want to force internet traffic through Lan2lan tunnel for filtering
I currently have an asa5520 configured to allow clients w/ a remote access vpn client to connect. once connected, they can surf the internet and the web pages are filtered through our internal filter. This is the desired effect.
My problem is that I need to build a Lan2lan vpn connection with an asa5505. The vpn connection is made and I have full network access - files / email / etc. The problem is when I surf the web on the PC that is connected to the 5505 goes straight out to the internet and not through the tunnel to our web filtering device. I'm assuming the problem is on the 5505 device. Please point me in the direction on how to force all traffic (once the VPN connection is established) on the 5505 to go through the tunnel to the 5520 device for web filtering.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...