Idle timeouts for dial-up ISDN PPP users on CiscoSecure 3.0 for Windows

[Graham.Ross]

Hi

I am using a virtual-template interface for dial-in users who are being authenticated by CiscoSecure 3.0 for Windows.

The users are dialing in using PPP on ISDN lines.

I would like to set an idle timeout for specific users/groups using either TACACS+ or RADIUS.

Thanks in advance

Graham

[tepatel]

Here is the link which explains it in detail with config.

http://www.cisco.com/warp/public/131/8.html