I have next
-------------------------------------
Sensor1# sh ver
Application Partition:
Cisco Systems Intrusion Detection Sensor, Version 4.1(1)S47
OS Version 2.4.18-5smpbigphys
-------------------------------------
Sensor1# sh conf
! ------------------------------
service Authentication
general
methods method Local
exit
exit
exit
! ------------------------------
service Host
networkParams
ipAddress A.B.C.46
defaultGateway A.B.C.1
hostname Sensor1
telnetOption enabled
accessList ipAddress A.B.C.0 netmask 255.255.255.0
exit
optionalAutoUpgrade
active-selection none
exit
timeParams
summerTimeParams
active-selection none
exit
exit
exit
! ------------------------------
service Logger
masterControl
enable-debug false
exit
=====================================
I tryed configure new signature and test it ( http://www.cisco.com/en/US/products/sw/secursw/ps5052/products_configuration_example09186a00801c0e3c.shtml )
I tryed test it but nothing appeared in IDS Event Viewer for that Sensor.
It's my first step and i can't imagine what should i see and where to find problem. May be simple advices how to fix that problem?
