Here is my understanding of what is available. You will need to talk with a Cisco Sales Representative to verify that this information is correct.
You will want to purchase CSPM 2.3.3i as part of the VMS bundle.
The VMS Bundle comes in 2 flavors.
A Restricted version that restricts you to 10 devices or less, and a Unrestricted that allows you to manage as many devices as possible with a single installation.
(In most practical situations a single CSPM 2.3.3i installation can manage up to around 25 sensors)
The VMS Bundle contains separate programs for managing IDS (CSPM 2.3.3i) and Firewalls (CSPM 3.0) as well as programs for managing VPN installations.
Part Numbers and Prices:
Restricted: CWVMS-2.0-WINR-K9 7,9995
Support: CON-SAS-CWVMS-R2 1,595
Unrestricted: CWVMS-2.0-UR-K9 19,995
Support: CON-SAS-CWVMS-UR2 3,995
NOTE: If you are using IDS Appliances, and are using less than 3 sensors then you can also choose to use IDM/IEV for IDS Management. IDM and IEV are included in the purchase cost and support cost for the Sensor Appliance at no additional charge. IDM is a web based configuration tool for a single sensor. IEV is a Windows 2000 based alarm viewer for a maximum of 3 sensor appliances. IDM is not supported on the IDS Module for the Cat 6000.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...