Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ids sensor without SCPM

i'have à cisco sensor 4235, but i dont have with un soft for Director host (like CSPM or an other) .

please do you have any idea how to admin to vein and admin alarm witout those softs( CSPM over win 2000). for exemple is winsyslog is adequate to the situation

thinks a lot.

5 REPLIES
Cisco Employee

Re: ids sensor without SCPM

Hi,

I suggest using IDM (IDS Device Manager) to manage/configure your sensor. IDM is a web-based application that allows you to manage your sensor via a web browser. Here's a link to find more information about using IDM for IDS version 4.1:

http://www.cisco.com/en/US/partner/products/sw/secursw/ps2113/products_installation_and_configuration_guide_book09186a00801a0c31.html

To view the sensor alarms, you can use IEV (IDS Event Viewer). Here's a link providing instructions for downloading, installing, and using IEV:

http://www.cisco.com/en/US/partner/products/sw/secursw/ps2113/products_installation_and_configuration_guide_chapter09186a00801a0c5a.html

Note: The links above are for the latest version, 4.1(1).

New Member

Re: ids sensor without SCPM

thinks a lot what the account must i have to acces to download IEV

Cisco Employee

Re: ids sensor without SCPM

You need a Smartnet account with Cisco. Here's a link to more info about Smartnet:

http://www.cisco.com/en/US/products/svcs/ps3034/ps2827/ps2978/serv_home.html

Note: If your 4235 is running software version 3.x, then IEV can be downloaded from the sensor itself (via IDM). Otherwise (if it's running 4.x), you'll need to download IEV from Cisco.com according to the link I provided earlier (which requires a Smartnet account).

New Member

Re: ids sensor without SCPM

ok, using the IDM i can download the IEV without a Smartnet account (or any others accounts, is that what you mean in the second suggestion?

Cisco Employee

Re: ids sensor without SCPM

If your 4235 is running version 3.X, then yes you can use IDM to download IEV from the sensor itself and no other accounts/contracts/etc are needed.

If your 4235 is running version 4.X, then IEV does not exist on the sensor. So, you'll have to download via the link I provided above. To do that, you'll need a Smartnet account.

Hope that helps,

Ward.

110
Views
3
Helpful
5
Replies
CreatePlease login to create content